All rights of this website are reserved for EXTRUTEX Austria and its partner companies, © 2026
Ca/Zn Stabilizer for Drainage Fittings -TS-6204
Ca/Zn Stabilizer for Drainage Fittings -TS-6204
| Parameter | Specification |
|---|---|
| Product Name | TS-6204 |
| Stabilizer Type | Calcium / Zinc (Ca/Zn) |
| Physical Form | Powder |
| Recommended Dosage | 5.0 – 5.5 PHR |
| Formulation Grade | ECO grade |
| Application | PVC Water & Drainage Fittings |
| Target Diameter | OD < 200 mm |
| PVC Type | Rigid PVC |
| Processing Methods | Extrusion, injection molding |
| Thermal Stability | Good |
| Initial Color Control | Good |
| Long-Term Heat Stability | Good |
| Lubrication Behavior | Balanced |
| Plate-Out Tendency | Low |
| Filler Compatibility | Low to medium CaCO₃ |
| Mechanical Property Retention | Good |
| Heavy Metals | None (Lead-Free) |
| Regulatory Compliance | RoHS, REACH |
| Typical Use | Water & drainage fittings |
| Storage Conditions | Dry, cool, sealed packaging |
| Shelf Life | 12 months |
Ca/Zn Stabilizer for Drainage Fittings -TS-6204
Description
Ca/Zn Stabilizer for Drainage & Water Fittings – TS-6204
Eco-Grade Stabilization for Small- to Medium-Diameter PVC Water Fittings (OD < 200 mm)
PVC water and drainage fittings under 200 mm diameter sit at a crucial intersection. They are produced in high volumes, installed everywhere, and expected to perform quietly for decades. The challenge is not extreme pressure or massive wall thickness — it is consistent quality, clean processing, and environmental compliance at a controlled cost.
TS-6204 is an ECO-grade calcium/zinc stabilizer, developed for PVC water and drainage fittings with outer diameters below 200 mm. It delivers reliable thermal stability, smooth processing, and regulatory confidence while keeping formulations efficient and economical.
This grade is ideal for manufacturers targeting standard water fittings, where performance must be dependable, production must be efficient, and sustainability is no longer optional.
Designed for Water Fittings Below 200 mm
Smaller fittings bring their own demands:
High production speeds
Short but repeated thermal cycles
Consistent color and surface quality
Tight cost control
TS-6204 is formulated to perform under these conditions without unnecessary additives or excessive dosage. It provides just the right level of stabilization to protect PVC during processing while maintaining stable fusion and clean tooling.
Typical applications include:
Water supply elbows and bends
Couplings and sockets
Small- to medium-diameter adapters
Drainage and water connection fittings
Plumbing system components
ECO-Grade Formulation: Efficiency with Responsibility
TS-6204 belongs to the ECO-grade category, meaning:
Optimized active content
Reduced environmental impact
Compliance with modern regulations
Efficient performance at lower dosage
It is designed for manufacturers who need safe, lead-free stabilization without the cost structure of premium, heavy-duty grades.
Optimized Dosage for Efficient Processing
Recommended dosage: 5.0 – 5.5 PHR
This dosage range ensures:
Adequate thermal stability for standard fittings
Smooth melt behavior
Uniform fusion and surface finish
Controlled formulation cost
The result is stable production with low scrap rates and consistent product quality.
Processing Behavior and Compatibility
TS-6204 supports:
Stable fusion during extrusion or molding
Low plate-out tendency
Clean molds and tooling
Compatibility with common lubricants and processing aids
It works well in formulations with moderate filler content, making it suitable for standard plumbing and drainage systems.
Environmental and Regulatory Alignment
As an ECO-grade stabilizer, TS-6204 meets key regulatory expectations:
Lead-free
Heavy-metal free
RoHS compliant
REACH compliant
This allows manufacturers to supply products for residential, commercial, and municipal water systems with confidence.
Typical Applications
PVC water fittings (OD < 200 mm)
Drainage and plumbing fittings
Residential and commercial water systems
Standard PVC connection components
General-purpose water infrastructure fittings
Features of OUR Ca/Zn Stabilizers
These stabilizers carry a quiet brilliance in their chemistry — qualities that make PVC behave not just well, but beautifully. Their strengths unfold like a list of promises:
• Excellent heat stability
They stand firm in the furnace of processing, guarding PVC against the harsh bite of thermal decay. Even under long residence times and high-output conditions, they keep the melt calm, steady, and true.
• Excellent processing
A formulation that flows like a well-rehearsed story — smooth, predictable, effortless. Machines run cleaner, extrusion runs longer, and operators breathe easier.
• High output rates
These stabilizers encourage speed. They let production lines surge forward, pushing greater volumes without sacrificing stability, gloss, or dimensional accuracy.
• Excellent plate-out properties
They keep the metal clean — die lips, barrels, calibrators — all free from waxy buildup. No residue, no streaks, no interruptions. Just pure, disciplined processing.
• Excellent dimensional stability
Pipes and fittings emerge with the confidence of perfect geometry. Sizes remain loyal to standards, resisting distortion, warpage, or shrinkage.
• Excellent surface finish
A stabilizer that leaves behind a sheen — a smooth, glasslike finish that speaks of controlled melt flow and refined lubrication balance.
APPLICATIONS:
Reviews (0)
Reviews
There are no reviews yet.
Ca/Zn Stabilizer for Drainage & Water Fittings – TS-6204
Eco-Grade Stabilization for Small- to Medium-Diameter PVC Water Fittings (OD < 200 mm)
PVC water and drainage fittings under 200 mm diameter sit at a crucial intersection. They are produced in high volumes, installed everywhere, and expected to perform quietly for decades. The challenge is not extreme pressure or massive wall thickness — it is consistent quality, clean processing, and environmental compliance at a controlled cost.
TS-6204 is an ECO-grade calcium/zinc stabilizer, developed for PVC water and drainage fittings with outer diameters below 200 mm. It delivers reliable thermal stability, smooth processing, and regulatory confidence while keeping formulations efficient and economical.
This grade is ideal for manufacturers targeting standard water fittings, where performance must be dependable, production must be efficient, and sustainability is no longer optional.
Designed for Water Fittings Below 200 mm
Smaller fittings bring their own demands:
High production speeds
Short but repeated thermal cycles
Consistent color and surface quality
Tight cost control
TS-6204 is formulated to perform under these conditions without unnecessary additives or excessive dosage. It provides just the right level of stabilization to protect PVC during processing while maintaining stable fusion and clean tooling.
Typical applications include:
Water supply elbows and bends
Couplings and sockets
Small- to medium-diameter adapters
Drainage and water connection fittings
Plumbing system components
ECO-Grade Formulation: Efficiency with Responsibility
TS-6204 belongs to the ECO-grade category, meaning:
Optimized active content
Reduced environmental impact
Compliance with modern regulations
Efficient performance at lower dosage
It is designed for manufacturers who need safe, lead-free stabilization without the cost structure of premium, heavy-duty grades.
Optimized Dosage for Efficient Processing
Recommended dosage: 5.0 – 5.5 PHR
This dosage range ensures:
Adequate thermal stability for standard fittings
Smooth melt behavior
Uniform fusion and surface finish
Controlled formulation cost
The result is stable production with low scrap rates and consistent product quality.
Processing Behavior and Compatibility
TS-6204 supports:
Stable fusion during extrusion or molding
Low plate-out tendency
Clean molds and tooling
Compatibility with common lubricants and processing aids
It works well in formulations with moderate filler content, making it suitable for standard plumbing and drainage systems.
Environmental and Regulatory Alignment
As an ECO-grade stabilizer, TS-6204 meets key regulatory expectations:
Lead-free
Heavy-metal free
RoHS compliant
REACH compliant
This allows manufacturers to supply products for residential, commercial, and municipal water systems with confidence.
Typical Applications
PVC water fittings (OD < 200 mm)
Drainage and plumbing fittings
Residential and commercial water systems
Standard PVC connection components
General-purpose water infrastructure fittings
Features of OUR Ca/Zn Stabilizers
These stabilizers carry a quiet brilliance in their chemistry — qualities that make PVC behave not just well, but beautifully. Their strengths unfold like a list of promises:
• Excellent heat stability
They stand firm in the furnace of processing, guarding PVC against the harsh bite of thermal decay. Even under long residence times and high-output conditions, they keep the melt calm, steady, and true.
• Excellent processing
A formulation that flows like a well-rehearsed story — smooth, predictable, effortless. Machines run cleaner, extrusion runs longer, and operators breathe easier.
• High output rates
These stabilizers encourage speed. They let production lines surge forward, pushing greater volumes without sacrificing stability, gloss, or dimensional accuracy.
• Excellent plate-out properties
They keep the metal clean — die lips, barrels, calibrators — all free from waxy buildup. No residue, no streaks, no interruptions. Just pure, disciplined processing.
• Excellent dimensional stability
Pipes and fittings emerge with the confidence of perfect geometry. Sizes remain loyal to standards, resisting distortion, warpage, or shrinkage.
• Excellent surface finish
A stabilizer that leaves behind a sheen — a smooth, glasslike finish that speaks of controlled melt flow and refined lubrication balance.
APPLICATIONS:
-
(0 customer reviews)